Eng 한글 繁體 简体

nRF5340 오디오 DK 블루투스 LE 오디오 개발 키트

향상된 오디오 품질, 더 긴 재생시간 및 모든 오라캐스트(Auracast™) 기능 지원

노르딕의 nRF5340 오디오 개발 키트(DK: Development Kit)는 블루투스 LE 오디오 제품을 위한 권장 플랫폼으로, 개발을 시작하는데 필요한 모든 것을 포함하고 있으며, 모든 오라캐스트(Auracast™) 기능을 지원한다. 이 키트는 구성이 가능하며, PC에서 오디오 데이터를 전송하거나 수신하는 USB 동글로 사용할 수도 있다. 또한 비즈니스 헤드셋이나 TWS(True Wireless Stereo) 이어버드로도 사용할 수 있다. 대부분의 적용사례에는 2개 이상의 DK를 사용하는 것이 좋다. 

메인보드 구성요소

이 DK의 3가지 주요 구성요소는nRF5340 SoCnPM1100 PMIC 및 시러스 로직(Cirrus Logic)의 CS47L63 오디오 DSP이다. CS47L63의 고성능 DAC와 차동 출력 드라이버는 외부 헤드폰 기기에 직접 연결할 수 있도록 최적화되어 있다. 모노 전용 및 다이렉트 스피커 출력이 있는 이어버드에 매우 적합하다. 

키트의 전원공급

nRF5340 오디오 DK는 일반적으로 USB를 통해 전원이 공급되며, 리튬이온 및 리튬 폴리머 배터리를 위한 배터리 커넥터를 갖추고 있다. 전용 전류 측정 핀을 이용해 소비 전류를 측정할 수 있으며, 이를 위해 노르딕의 파워 프로파일러 키트 II(Power Profiler Kit II)를 사용하는 것이 좋다.

새로운 코덱

블루투스 클래식에 사용된 ‘낮은 복잡도의 SBC(Subband Codec)’를 대체한 새로운 ‘LC3(Low Complexity Communications Codec)’ 코덱 또한 이 DK에서 이용할 수 있다. LC3 코덱은 무선 데이터 레이트의 약 절반의 속도로 SBC에 비해 우수한 오디오 품질을 제공한다. 이러한 낮은 데이터 레이트는 제품의 전력소모를 최소화하는데 중요한 요소이다. 

Download PDFnRF5340 오디오 DK 제품 개요서 다운로드 [PDF]

Key features

Bluetooth LE Audio

Auracast™ supported

Based on our nRF5340 SoC

2.4 GHz antenna

Two 3.5 mm audio jacks

Cirrus Logic Audio DSP CS47L63

SWF RF connector for direct RF measurements

5 user-programmable buttons 

4 user-programmable LEDs

SEGGER J-Link debugger on board

Pins for measuring power consumption

SD-Card holder for additional storage

nRF Connect SDK

nRF Connect SDK is a common software development kit for Bluetooth Low Energy, Wi-Fi, cellular IoT, Bluetooth mesh, Thread, Zigbee and Matter. It supports all our nRF52, nRF53, nRF70 and nRF91 Series wireless devices.

 

nRF Connect for Desktop

nRF Connect for Desktop is a cross-platform framework for development applications. It contains applications for testing Bluetooth Low Energy and LTE links, power optimization, programming and more.

nRF Connect for VS Code

nRF Connect for VS Code lets you develop, build, and debug applications based on the nRF Connect SDK using the VS Code Integrated Development Environment (IDE).

nRF Command Line Tools

The nRF Command Line Tools are used for development, programming, and debugging of Nordic Semiconductor's nRF51, nRF52, nRF53 and nRF91 Series devices.