日本語 Eng

nRF9160 DKDevelopment kit

Cellular IoT development kit for LTE-M, NB-IoT, GPS and Bluetooth LE

The nRF9160 DK is an affordable, pre-certifed single-board development kit for evaluation and development on the nRF9160 SiP for LTE-M, NB-IoT and GPS. It also includes an nRF52840 board controller that for example can be used to build a Bluetooth Low Energy gateway.

It has a dedicated LTE-M and NB-IoT antenna that supports a wide range of bands, to operate globally. LTE bands B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28 and B66 have been certified. See this page for more details.

A dedicated patch antenna for GPS, and a 2.4 GHz antenna to be used with Bluetooth LE are included on the board. SWF RF connectors are available for the LTE-M/NB-IoT and 2.4 GHz antennas. A connector is also available to attach an external GPS antenna.

All GPIOs and interfaces (SPI/TWI/UART), are available via connectors. The kit is Arduino Uno Rev3 compatible, meaning it can be easily interfaced with external device shields.

User-programmable LEDs (4), buttons (2) and switches (2) are available to easily give input and get output. The nRF9160 DK has both a 4FF SIM card slot and an MFF2 SIM footprint, to support both plug-in and soldered (e)SIMs. It is bundled with a eSIM card from iBasis preloaded with 10 MB.

Programming and debugging is enabled through the Segger J-Link OB, which also supports external targets. The nRF9160 DK is supported by a full suite of development software and tools. All free to download and use commercially.

nRF Connect SDK includes everything needed to get started, application layer protocols, examples, peripheral drivers and more. The kit can easily be connected to our cloud solution, nRF Connect for Cloud. The nRF Link Monitor tool located in nRF Connect for Desktop provides an AT command interface that enables you to test your link, and extract information about the network.

The nRF9160 SiP and nRF9160 development kit are now in production and are suitable for full end-to-end sensor to cloud development. We’re still developing features and optimizing performance.

See the nRF9160 certifications page for details on certification, LTE bands and security supported. 

Download PDF Download nRF9160 DK product brief (PDF)

Key Features
LTE-M
NB-IoT
+23dBm
output
GPS
location
TrustZone
Arm
CryptoCell
Arm
SIM
card
J-Link
Segger
Arduino Uno
form factor
4 LEDs
programmable
4 Buttons
programmable
Antennas
LTE/GPS

Regulatory Certification

Check out the regulatory nRF9160 Certifications to see in which regions the nRF9160 SiP has been certified for radiated operation. Its modem firmware is limited to operation in the bands that were certified at the time of production.
More information on network operator coverage can be found under the Get started tab.

Develop

with the nRF9160 SiP

nRF9160 SiP

Low power SiP with integrated LTE-M/NB-IoT modem and GPS

Fully integrated SiP for cellular IoT
Multimode LTE-M/NB-IoT modem with GPS
700-2200 MHz LTE band support
Certified for global operation
Dedicated application processor and memory
64 MHz Arm Cortex-M33
1 MB flash + 256 KB RAM
Arm TrustZone + Arm CryptoCell

Cellular IoT prototyping platform

With the nRF9160 SiP

Nordic Thingy:91

The Nordic Thingy:91 is an easy-to-use cellular IoT prototyping platform, designed to help building prototypes and demos, without the need to build hardware or even write firmware.

Measure current

With ease

Power Profiler Kit II

The Power Profiler Kit II is an easy to use tool for measurement and optimization of power consumption for embedded solutions.

Videos

Watch and learn

Introducing nRF9160 DK

How to power profile your cellular IoT application

Cellular IoT for everything else

Field-testing how distance affects the behavior of LTE-M and NB-IoT

Low power cellular for the IoT

Latest news

Telenor
Corporate
06 Apr 2021

Telenor’s Managed IoT Cloud and the Nordic Thingy:91 enables...

Read More
Anatel
Corporate
29 Mar 2021

Certification of the nRF9160 SiP by Anatel paves the way for...

Read More
BP&M
Corporate
15 Mar 2021

BP&M will support Nordic’s complete portfolio of low power c...

Read More