nRF54LM20A System-on-Chip

Ultra-low-power wireless SoC for Bluetooth LE, Matter, Thread, and Zigbee

The nRF54L Series offers SoCs that combine an efficient MCU with ultra-low-power wireless connectivity. The nRF54LM20A provides the largest memory option in the series, with 2 MB NVM and 512 KB RAM. It features an extended set of peripherals, high-speed USB, and is available with up to 66 GPIOs.

nRF54LM20A supports Bluetooth LE, Matter, Thread, Zigbee, and 2.4 GHz proprietary protocols with data rates up to 4 Mbps for low-latency applications. It also supports Bluetooth Channel Sounding, Bluetooth Mesh, Aliro, and Wi-Fi with nRF70 Series companion ICs.

Performance highlights

  • Processing efficiency and performance: 193 CoreMark/mA @ 3 V, 503 CoreMark®
  • Radio power consumption: 3.3 mA for RX and 5.0 mA for TX @ 0 dBm (@ 3 V)
  • Sleep modes power consumption: from 0.7 μA to 4.3 μA (@ 3 V)
  • Maximum TX power: +8 dBm (CSP) / +7 dBm (QFN) 
  • Sensitivity: -96 dBm (1M Bluetooth LE), -101 dBm (802.15.4)
  • Optimized for the lowest total average current


Key benefits

  • Reduced design complexity, size, and cost
  • Reliable and robust wireless connectivity
  • Extended battery life enabled by lower power consumption
  • Built-in security features supporting compliance with regulations
  • Broad range of MCU feature sets across the series
  • nRF Cloud support for device management, FOTA and more


The nRF54L Series

 
Key Features
  • 128 MHz Arm® Cortex®-M33
  • 2 MB NVM and 512 KB RAM
  • Ultra-low-power multiprotocol 2.4 GHz radio
  • 1x High-speed SPI/UART
  • 6x SPI/TWI/UART
  • High-speed USB
  • ADC, TDM, PDM, NFC, PWM, and QDEC
  • Global RTC available in System OFF
  • 128 MHz RISC-V coprocessor with support for SoftPeripherals
  • Up to 66 GPIOs
  • TrustZone® isolation, tamper detection, and cryptographic engine with side-channel leakage protection
  • Package options: CSP98, CSP61, QFN52

Reference layout

FCCSP package

Changelog:

1.0

  • Editorial updates to schematic and layout documents
  • nRF54LM20B PAAA footprint aligned with mechanical specification in datasheet
    • BGA ball pattern offset by 0.09 mm from the component body center
  • Renumbering of designators for decoupling and RF matching components relative to v0.6 release.
    • C4, C5, C1, C2, C6, C7, C14, C3, C12, C13, C10, C11, C8 renumbered to C1-C13 respectively with values unchanged
    • L1, L2, L3, L4 renumbered to L4, L1, L2 and L3 respectively with values unchanged

0.6

  • FB2 removed
  • C12 updated to 1.5pF
  • L4 changed to 3.3nH
  • C6 changed to 4.7µF
  • C7 changed to N.C.
  • X2 changed to X1
  • X1 changed to X2

0.5

  • Pad D1 on nRF54LM20 connected to GND on top layer
  • Removed thermal relief on C3, C12 and C13

0.4

  • C9 removed
  • L5 and C8 added
  • L2 changed to 3.6nH
  • L3 changed to 4.7nH
  • L4 changed to 2.2nH
  • C3 and C12 changed to 1.2pF
  • C13 changed to DNM
  • C6 changed to 4.7µF
  • R2 changed to 200ohm
  • Updated component placement on C8, C14, L5 ,FB2 and X2 to match the schematic
  • Removed GND on inner layers below the 50 ohm impedance trace

0.3

Reference layout

WLCSP package

Changelog:

1.0

  • Editorial updates to schematic and layout documents
  • Renumbering of designators and value changes for decoupling and RF matching components relative to v0.2 release.
    • C1, C2, C3, C4, C5, C6, C7 renumbered to C3, C4, C8, C1, C2, C5, C6 respectively with values unchanged
    • C10, C11, C13, C14 renumbered to C11, C12, C10 and C7 respectively with values unchanged
    • C12 renumbered to C9 and value updated to 1.5pF
    • L1, L2, L3, L4 renumbered to L4, L1, L2 and L3 respectively with values unchanged
  • Updated USB circuitry for USB 2.0 compliance
    • R2 updated to 200Ω, ±1%

0.2

  • Editorial updates to schematic and layout documents
  • Reference layout now covers both nRF54LM20A and nRF54LM20B CAAA devices
  • Updated RF matching network to improve RF performance
    • L4 updated to 3.3nH
    • C12 updated to 0.5pF
  • Updates to DECRF filter circuit to improve RF performance
    • L5 and L8 removed
    • FB2 removed
    • C14 moved closer to DECRF pin
  • Layout improvements

Reference layout

QFN package

Changelog:

1.0

  • First release