Eng 简体

nRF52840 DK Development kit

Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee development kit for the nRF52840 SoC

The nRF52840 DK is a versatile single-board development kit for Bluetooth Low Energy, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary applications on the nRF52840 SoC. It is the recommended Nordic development kit for Amazon Sidewalk. It also supports development on the nRF52811 SoC.

The nRF52840 DK can also be used for Matter over Thread where Thread is used for transport and Bluetooth LE for commissioning. Matter devices based on Thread are required to feature Bluetooth LE concurrently to enable adding new devices to a network.

It facilitates development by exploiting all features of the nRF52840 SoC. It includes an NFC antenna that quickly enables utilization of the NFC-A tag peripheral. All GPIOs are available via edge connectors and headers, and 4 buttons and 4 LEDs simplify input and output to and from the SoC. An on-board external memory is connected to the QSPI peripheral in the nRF52840 SoC.

It is Arduino Uno Revision 3 compatible, making it possible to mount 3rd-party shields with ease. It comes with an on-board SEGGER J-Link debugger allowing programming and debugging both the on-board SoC and external targets through the debug out header. It also interfaces directly with the Power Profiler Kit II.

The DK is typically powered with USB, but can be powered by a wide range of sources, within the supply range of 1.7 to 5.0 V. In addition to USB, it can be powered with an external source, but also includes a CR2032 battery holder and a Li-Po battery connector, for in-field testing. Current consumption can be measured by using the dedicated current measurement pins.

Hardware layout and schematics for the nRF52840 DK are available under Downloads.

Download nRF52840 DK product brief [PDF]

Download nRF52840 DK product brief Simplified Chinese [PDF]

Buy now
Ask us about this
Key features

Supports Bluetooth LE, Bluetooth mesh, NFC, Matter, Thread and Zigbee

User-programmable LEDs(4) and buttons(4)

2.4 GHz and NFC antennas

SWF RF connector for direct RF measurements

On-board SEGGER J-Link debugger/programmer

Arduino Uno Rev3 form factor

Pins for measuring power consumption

1.7-5.0 V supply from USB, external, Li-Po battery or CR2032 coin cell battery

Documentation
Downloads
CE Certification

Peripheral UART

Demo firmware

Selected version
1.0.0

Changelog:

1.0.0

SHA256: 584fad3dc1cea3622ac889597f67b5f0df85b8a3ba92a635a01fb71b269f1574

Built using nRF Connect SDK v2.0.0

Interface MCU firmware

Selected version
170724 J-LINK

Changelog:

170724 J-LINK

nRF5x-OB-JLink-IF

Hardware files

Selected version
3.0.0

Changelog:

3.0.0

Changelog:

Changing interface MCU to nRF5340

SHA256: c72ef50ffe55a619b2bd4b78b09c493d057817acecaf19ea3e28b5ee9b1ee72d

2.1.0

Changelog:

BOM change, updating nRF52840 build code: nRF52840-QIAAF0

SHA256: 8afe3d532b8da20a5cd231defe766eb7b0d5af36cf2dd1f07989db32f1c3316d

2.0.2

Changelog: v2.0.2: Component change due to EOL

2.0.1

Changelog: v2.0.1: Silkscreen update, added information leaflet

2.0.0

Changelog: v2.0.0

  • Updated battery protection circuit
  • Changed battery holder
  • Changed DCDC inductor

For nRF52840 USB:

  • Added series resistor on VBUS/VDDH
  • Removed USB 0R series resistors

For both nRF52840 and JLINK USB:

  • Changed USB shield connection

1.1.1

Changelog: v1.1.1: Adding cardboard box to kit packaging

1.1.0

Changelog v1.1.0: New nRF52840-QIAA revision

1.0.0


nRF52840 Preview DK Hardware Files

0.9.0


nRF52840 Preview DK Hardware Files

CE Certification

Selected version
1.0.0

Changelog:

1.0.0