Eng 简体

nRF93M1 Module

Low power, easy-to-use LTE Cat 1 bis module with integrated location and nRF Cloud services

The nRF93M1 is an easy-to-use, compact, pre-certified LTE Cat 1 bis module delivering global connectivity for more data-intensive cellular IoT applications. It integrates Wi-Fi and cellular location and a rich set of features enabling optimized, robust designs. The nRF93M1 is available in multi-regional and global module options that is fully pin- and interface-compatible. 

nRF93M1 is supported by Nordic's AI-assisted development flow and ships out of the box with nRF Cloud location and device management services to lower deployment risk and speed time-to-market. Backed by Nordic's long-term availability and lifecycle support. 

Key Benefits 

  • Global band LTE™ Cat 1 bis Smart Modem with low-power Wi-Fi and cellular location 
  • Easy-to-use host and modem architecture with control, data and diagnostics over UART or USB 
  • nRF Cloud enabled out of the box — location, observability and device management services via AT commands 
  • Flexible SIM support including multi-SIM, IoT eSIM (SGP.32) support and integrated SoftSIM framework 
  • Extended battery life with standard 3GPP and Nordic proprietary power saving features in an optimized design 

nRF93M1 Pin compatible Variants

nRF93M1-LABA:
Multi-regional

Sampling Now

LTE bands for Europe, Asia, the Middle East, and Africa, with corresponding certifications.

nRF93M1-LACA:
Global

Sampling Q3-2026

Comprehensive set of global LTE bands and certifications for worldwide deployments.
Ask us about this
Key features

Pre-certified connectivity module for LTE Cat-1bis

LTE Cat-1bis modem with 3GPP Rel. 14 support

617-2690 MHz LTE FDD and TDD band support

Power Class 3 (23 dBm)

Certified for global and regional operation (GCF, PTCRB)

Peripherals including high-speed USB, UART, IOs, coexistence interface and more

Support for (e)UICC/eSIM (SGP.32 IoT) and Software SIM framework

Secure firmware updates via nRF Cloud

Location services using Wi-Fi scanning and cell location

Development Kit

Evaluate, prototype and develop with nRF93M1

nRF93M1 DK — the fastest way to evaluate

The nRF93M1 DK pairs the ultra-low-power nRF54L15 as a host MCU with the nRF93M1 so you can prototype and develop your application rapidly in nRF Connect SDK and Nordic’s AI assisted development flow.

Read more

Quick start

Set up your kit in five steps (see the full Getting Started guide for detail): 

  1. Assemble — attach the antenna, insert the SIM, connect USB-C to your PC. 
  2. Install tools — nRF Util and nRF Connect for Desktop; 
  3. Verify — send AT (expect OK) and confirm the nRF93M1 modem firmware version. 
  4. Connect to the network — enable registration reporting, set CFUN=1, and test connectivity. 
  5. Connect to nRF Cloud — register your account and provision the device, then add it under Fleet → Devices.