nRF9161 系统级封装(SiP)

This release support nRF9131 LACA A0, nRF9151 LACA A0, and nRF9161 LACA A0 SiP.

This release does not support nRF9160 SiP.

Highlights: 

General

• Added support for the nRF9151 LACA A0 SiP module.
• Added support for IMEI read, write, and test operations through nRF Util development tool.

Cellular IoT

• Introduced support for power class 5, enabling a 20dBm TX transmitter mode with nRF9151.
• Socket option for power optimized way to resume data transmission after PDN disconnect and connect procedures. 
  
  • This feature is particularly useful for DTLS + CID and UDP connections.
• Enhanced network selection optimization during initial search.

Location services / GNSS

• Improved fix accuracy and availability in periodic fixes when the fix period is 60s or less.
• Updated speed and altitude operational envelope limits for dynamics modes to further reduce possible GNSS outliers.
• Updated QZSS health data handling to match IS-QZSS-PNT-005.
• Addressed modem instability when GNSS 1PPS functionality was turned on/off repeatedly.

A complete list of new functionality, changes and bug fixes is in the release notes found here or inside the .zip file.

This release is aligned with v1.1 of the nRF91x1 Cellular AT Commands Reference Guide.

Some of the new features requires support also from the nRF Connect SDK.

It is recommended to use the latest version of nRF Connect for Desktop and nRF Connect Programmer tools.

This release support nRF9131 LACA A0 and nRF9161 LACA A0 SiPs, not nRF9160 SiP.

Highlights: 

Cellular IoT

• Improved network selection when using MVNO subscriptions, leading to efficient power utilization.
• Power consumption enhancements and quick recovery from unexpected network registration issues, ensuring seamless communication.
• Improvements for application-driven monitoring of data transmission over the air interface, providing better insights and control.
• Improved reliability and increased data throughput for an optimized user experience.
• Enhanced modem error recovery mechanisms and reduced current consumption in error situations.
• Added support for limited %XRFTEST RX tests.

Location services / GNSS

• GNSS position outlier reduction, particularly in weak signal conditions, for more accurate location information.
• GNSS TTFF and sensitivity performance improvements, ensuring quicker and more reliable position fixes.
• Optimized GNSS duty cycle for reduced power consumption, extending battery life.

A complete list of new functionality, changes and bug fixes is in the release notes found here or inside the .zip file.

This release is aligned with v1.0 of the nRF91x1 Cellular AT Commands Reference Guide.

Some of the new features requires support also from the nRF Connect SDK.

It is recommended to use the latest version of nRF Connect for Desktop and nRF Connect Programmer tools.

This release version has beta level quality and therefore should be used for test and evaluation purposes only, not for productization.

This is a BETA release and there will not be a FOTA path towards the official v2.0.0 when that releases

This release version doesn’t support nRF9160.

Make sure to download nRF Command Line Tools v10.22.1 or newer to be able to flash this firmware to your nRF91x1 device

With major changes listed in release notes, baseline for feature set is nRF9160 release version mfw_nrf9160_1.3.5.

Highlights: 

• Support for nRF9131 and nRF9161 SiP modules.

Cellular IoT

• Support of 3GPP release 14 baseline and selected optional 3GPP LTE release 14 and 15 features.
• Support for user provisioned International Mobile Equipment Identity (IMEI) in nRF9131 and nRF9161 SiP modules.
• Support for application to monitor when and if data was sent over the air interface.
• Support for application to read TLS session status whether session was resumed or a complete handshake.
• Support for application to query used (D)TLS cipher suite.
• Support for improved power saving mode sleep when network does not configure PSM.
• Support for NB-IoT enhanced mobility with 3GPP RRC Connection Re-establishment feature.
• Improved support of event notifications and traceability.
• Improved accuracy for AT%CONEVAL energy consumption estimation.
• Various set of improvements for stability and enhancements for error recovery.
• Various set of improvements for power consumption.

Location services / GNSS

• Improved acquisition TTFF and sensitivity performance in Hot and Cold starts.
• Improved acquisition performance in certain situations.
• Position accuracy improvements in dense urban environments.
• QZSS assistance input support.
• NeQuick ionosphere parameter assistance input support.

A complete list of new functionality, changes and bug fixes is in the release notes found here or inside the .zip file.

This release is aligned with v0.8 of nRF91x1 CIoT and Positioning AT Commands reference guide (Available here).

Some of the new features requires support also from the nRF Connect SDK.

It is recommended to use the latest version of nRF Connect for Desktop and nRF Connect Programmer tools.