Wi-Fi

Enabling low-power Wi-Fi 6


Nordic Semiconductor brings decades of ultra-low-power wireless expertise to Wi-Fi. Nordic Wi-Fi solutions now include the nRF71 Series: wireless SoCs that put dual-band Wi-Fi 6 or tri-band Wi-Fi 6E, Bluetooth LE and a powerful application processor on a single chip, built for battery-powered IoT. For products that already have a host, Nordic's Wi-Fi companion ICs add low-power Wi-Fi 6 alongside the radio you already use.

 

Why choose Nordic´s Wi-Fi solution?

battery.png     Ultra-low power consumption:: Nordic Wi-Fi is engineered for power save from the RF up. A dedicated low-power receiver picks up beacons at a fraction of full receive current, and the nRF7120 sleeps at just 2.44 µA with its Wi-Fi connection kept. Power save works with the access points already installed, with no Wi-Fi 6 router or Target Wake Time needed. At DTIM10 the average current is only 14 µA at 2.4 GHz and 8 µA at 5 GHz, so a connected device can stand by for years on a single battery, not months.
       
cogwheels.png
    Powerful multi-radio, multi-stack MCUs: the nRF71 Series is a high-end wireless MCU, not only a Wi-Fi radio. An Arm Cortex-M33 at 256 MHz, a RISC-V coprocessor, 4 MB of on-chip non-volatile memory and 1 MB of RAM run the Wi-Fi, Bluetooth LE and Thread stacks, Matter and your application on one chip, with room for a full firmware update image.
       
lock embedded.png     Easy integration: with Wi-Fi, Bluetooth LE and the application processor on one chip, there is no host-to-Wi-Fi interface to route, no external flash to add and no coexistence wiring between chips. Wi-Fi is fully integrated in nRF Connect SDK, the same SDK used for the nRF54 Series and Nordic's Wi-Fi companion ICs. Start development on the nRF7120 DK.
       
rocket.png     Robust security: Nordic provides comprehensive documentation, technical support, development tools and a Wi-Fi Fundamentals course in our Developer Academy to help you get started with your Wi-Fi project.
       

The tools to get you started

We offer development tools that make it easy to develop Wi-Fi products based on nRF71 and nRF70 devices Wi-Fi 6 Companion IC. We enable you to build your product as quickly as possible without sacrificing quality. We provide tools for developing code, testing it, debugging, and much more.

Below is an overview of all relevant development tools for developing a Wi-Fi product. Make sure you also check out the Development hardware and Development software tabs.

Desktop development tools

nRF Wi-Fi Provisioner

Our nRF Wi-Fi Provisioner app can be used to provision nRF7002 devices to Wi-Fi networks over an encrypted Bluetooth LE connection.Works in conjunction with the Wi-Fi provisioning sample

nRF Connect for Desktop

nRF Connect for Desktop is a cross-platform framework for development applications. It contains applications for testing Bluetooth Low Energy and LTE links, power optimization, programming and more.

nRF Command Line Tools

The nRF Command Line Tools are used for development, programming, and debugging of Nordic Semiconductor's nRF51, nRF52, nRF53 and nRF91 Series devices. Archived and replaced by nRF Util.

nRF Util

nRF Util is a unified command line utility for Nordic products.