nRF52820System on chip

Bluetooth 5.2 SoC with built-in USB supporting Bluetooth Low Energy, Bluetooth mesh, Thread and Zigbee

The nRF52820 is a System-on-Chip (SoC) offering USB and advanced wireless connectivity in a small package, for HID, smart home, commercial, and industrial applications.

The nRF52820 features an Arm Cortex-M4 processor, clocked at 64 MHz. It has 256 KB Flash and 32 KB RAM, and a range of analog and digital interfaces such as an analog comparator, UART, SPI, TWI, QDEC, and last but not least, USB. It can be supplied with a voltage from 1.7 to 5.5 V which enables powering the device from sources such as rechargeable batteries or via USB. The 2.4 GHz multiprotocol radio is fully featured and provides up to +8 dBm output power.

nRF52820 supports all Bluetooth Low Energy features, including Direction Finding, high-throughput 2 Mbps, Long Range, and all Bluetooth 5.2 features. It also supports Bluetooth mesh, Thread and Zigbee mesh protocols. 

The nRF52820's USB peripheral implements a Full Speed USB 2.0 device that offers a widely-used interface that enables low-latency and high-bandwidth communication with a range of hosts, such as PCs, tablets, smartphones, and gateways. It also adds the option of performing device firmware updates (DFU) over USB. When connected to a USB host, the nRF52820 can be directly powered by the always-present 5 V VBUS signal, and a reference layout for this configuration is provided under the Downloads tab.

The nRF52833 DK is the recommended development kit, it emulates the nRF52820, and can be used as a starting point for development before moving over to a custom board. 

Download PDFDownload nRF52820 SoC product brief [PDF]

Key features
  • 64 MHz Arm Cortex-M4
  • 256 KB Flash, 32 KB RAM
  • 2 Mbps, 1 Mbps, Long Range
  • Bluetooth Low Energy
  • Bluetooth Direction Finding
  • Bluetooth mesh
  • Thread, Zigbee
  • +8 dBm TX power
  • 128-bit AES
  • UART, SPI, TWI, QDEC
  • Full Speed USB 2.0
  • -40 to 105 °C extended temperature range
  • 1.7 to 5.5 V supply voltage

Reference layout 

Changelog:

0.7

nRF52820-QDAA Reference Layout 0_7

Published 19 March, 2020.

If you're not using the latest revision of this device, or are unsure which revision you have, please click here to input your package type and build code. We'll make sure all your downloads are compatible.
nRF52810 SoC

Please input the package type and build code for your device below. You'll need to read these codes off one of your devices.

= Click on the ‘+’ next to each download you want, and we’ll .zip them into one archive for you.

Compatible SoftDevices

Click to add to download

Compatible SDK versions

Click to add to download

You have selected: