Eng 简体

nRF52840 Dongle nRF Connect for Desktop hardware

Designed for nRF Connect for Desktop

The nRF52840 Dongle is a small, low-cost USB dongle that supports Bluetooth 5.4, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary protocols. The Dongle is the perfect target hardware for use with nRF Connect for Desktop as it is low-cost but still support all the short range wireless standards used with Nordic devices. The dongle has been designed to be used as a wireless HW device together with nRF Connect for Desktop. For other use cases please do note that there is no debug support on the Dongle, only support for programming the device and communicating through USB.

It is supported by most of the nRF Connect for Desktop apps and will automatically be programmed if needed. In addition custom applications can be compiled and downloaded to the Dongle. It has a user programmable RGB LED, a green LED, a user programmable button as well as 15 GPIO accessible from castellated solder points along the edge. Example applications are available in the nRF5 SDK under the board name PCA10059.

The nRF52840 Dongle is supported by nRF Connect for Desktop as well as programming through nRFUtil.

The box includes an nRF52840 Dongle.

Download PDFDownload nRF52840 Dongle product brief [PDF]

Download PDFDownload nRF52840 Dongle product brief Simplified Chinese [PDF]

Key Features
Bluetooth 5
Bluetooth mesh
Thread and Zigbee
nRF Connect for Desktop
15 GPIOs
no external supply

When you start

with the nRF52840 Dongle

Congratulations on getting the nRF52840 Dongle!

Minimum requirements:
Before you start, check that you have the required hardware and software.

Hardware requirements: PC with a standard type-A USB port

Software requirements: nRF Connect for Desktop

Operating system: macOS, Linux, or Windows 7 or later

Gettting started with the nRF52840 Dongle.