The Sigur MR1 Reader is designed for indoor and outdoor operation, hot and cold environments (operating temperature range from -25° to +55° C), and is protected against dust and moisture with an enclosure rated to IP65.
Sigur has developed two iOS- and Android-compatible smartphone apps that integrate with the card reader. The first partner app enables building management to configure the settings for each connected Sigur MR1 Reader, as well as perform firmware updates using the Nordic SoC’s over-the-air device firmware update (OTA-DFU) capability. The second app, for authorized users, enables building access.
Nordic’s nRF52832 multiprotocol SoC combines an 64MHz, 32-bit Arm® Cortex™ M4F processor with a 2.4GHz multiprotocol radio (supporting Bluetooth 5, ANT™, and proprietary 2.4GHz RF protocol software), with 512kB Flash memory and 64kB RAM. The SoC is supplied with Nordic’s S132 SoftDevice, a Bluetooth 5-certifed RF software protocol stack for building advanced Bluetooth LE applications. The S132 SoftDevice features Central, Peripheral, Broadcaster and Observer Bluetooth LE roles, supports up to twenty connections, and enables concurrent role operation.
“When developing the MR1 Reader, we reviewed several suppliers before selecting the Nordic SoC as it perfectly complied with our requirements for quality, sufficient storage space, and radio sensitivity,” says Sergey Leshchev, Development Project Manager at Sigur. “We communicated with Nordic’s technical support experts on issues related to the chip operation and they always helped us achieve a timely resolution.”