Low power cellular IoT

Enabling a world of everything connected

Introduction to cellular IoT

Webinar recording

Introduction to cellular IoT

LTE-M

LTE-M (also known as Cat-M1) is designed for low-power applications requiring medium throughput. It has a narrower bandwidth of 1.4 MHz compared to 20 MHz for regular LTE, giving a longer range, but less throughput. The throughput is 375 kbps uplink and 300 kbps downlink, providing approximately 100 kbps application throughput running IP. It is suitable for TCP/TLS end-to-end secure connections. Mobility is fully supported, using the same cell handover features as in regular LTE. It is currently possible to roam with LTE-M, meaning it is suitable for applications that will operate across multiple regions. The latency is in the millisecond range offering real-time communication for time-critical applications.

LTE-M is perfect for medium-throughput applications requiring low power, low latency, and/or mobility, like asset tracking, wearables, medical, POS and home security applications.

LTE-M

NB-IoT

NB-IoT (also known as Cat-NB1) is a narrowband technology standard that does not use a traditional LTE physical layer but is designed to operate in or around LTE bands and coexist with other LTE devices. It has a bandwidth of 200 kHz, giving it a longer range and lower throughput compared to LTE-M and regular LTE. The throughput is 60 kbps uplink and 30 kbps downlink. It is suitable for static, low-power applications requiring low throughput. With the introduction of Cat-NB2 in 3GPP release 14, you can achieve a throughput of 169 kbps uplink and 127 kbps downlink if the network supports it. 

NB-IoT is perfect for static, low throughput applications requiring low power and long-range, like smart metering, smart agriculture and smart city applications. It also provides better penetration in, for example, cellars and parking garages compared to LTE-M.

NB-IoT

LTE-M and NB-IoT

  Key features comparison


LTE-M NB-IoT
 Also known as  “eMTC”,”LTE Cat-M1”  “LTE Cat-NB1” (3GPP rel 13) - "LTE Cat-NB2" (3GPP rel 14)
 Max Throughput
(DL/UL)
 300/375 kbps
 30/60 kbps (NB1) - 127/169 kbps (NB2)
 Range
 Up to 4x  Up to 7x
 Mobility/cell re-selection  Yes  Limited
 Frequency deployment  LTE In-band  LTE In-band, guard band and GSM re-purposing
 Deployment density  Up to 50,000 per cell  Up to 50,000 per cell
 Module size  Suitable for wearables  Suitable for wearables
 Power consumption  Up to 10 years of battery lifetime  Up to 10 years of battery lifetime

Energy efficiency

Energy efficiency is a cornerstone of cellular IoT technology. Both LTE-M and NB-IoT are designed to make years of operation from a battery-driven power source a reality. This has been achieved by using a range of techniques. Data throughput is lower than standard LTE, and this brings the energy consumption down due to slightly simpler modulation schemes and less complex radios. However, as with all low power communication technology, the real key is managing sleep, wake-up and communication events effectively and efficiently.

Two energy efficiency innovations make a significant contribution to LTE-M and NB-IoT power-saving capabilities, eDRX (Extended Discontinuous Reception) and PSM (Power Saving Mode). Both eDRX and PSM work in harmony to make battery operation for many months and years possible.

LTE uses a system of paging cycles which are 1.28 seconds in duration. A paging cycle is the window of time a device can be contacted by the network for an exchange of data. The resting period between the paging windows is known as hyper-frames. The benefit of eDRX is that it allows ‘N’ number (40+) of hyper-frames to occur at a period of 10.24 seconds each before a device wakes up again for activity in its next paging window. In this way, devices can sleep and talk in a highly efficient and synchronized manner.

PSM mode simply enables the device to enter a deep sleep mode for whatever time is necessary, this could be perhaps an hour, a day, or weeks. For applications that have no real-time requirements and only communicate very periodically, for example, an irrigation system in agriculture, this brings very high levels of energy conservation and can mean products can run on a few AA-sized lithium batteries for up to 10 years.

The nRF9160 is optimized to take full advantage of all the power-saving efficiencies offered by LTE-M and NB-IoT including eDRX and PSM.

Power Consumption

Quality of service

Cellular networks offer an unrivaled set of performance characteristics in the LPWAN sector. Cellular operates in licensed bands, the importance of this cannot be underestimated. Licensed bands come at great expense, typically billions of dollars, and for good reason. When you own the band, you can dictate and guarantee the performance and reliability of communication within those bands. You can also minimize wasted energy due to interference between devices.

Cellular is designed for very high Quality-of-Service (QoS). There are a known number of connections and these can be accommodated and managed accordingly. Unlicensed bands have no such guarantees and anyone can operate there. For guaranteed performance and reliability licensed cellular is a clear winner for LPWAN.

Deployment density and coverage

Cellular 4G networks are already in place with dense cell tower coverage over most cities in the world and most countries having a high degree of country coverage. This puts cellular in a position to be ready to deploy at a huge scale with minimal infrastructure building. 

Because LTE-M and NB-IoT are designed to be spectrally efficient and because typical use-cases are low activity by nature it will be possible to connect several 10s of thousand of devices to a single base station. Typically, cell towers host several base stations, and this means deployment density can truly happen at a massive scale. 

Best-in-class security

LTE networks have unrivaled security measures as standard for the LPWAN sector. At the device level is the SIM card or UICC, this is a secure element with a definitive identifier embedded in hardware for that particular device. It ensures authentication to the cellular service subscription and encrypts data over-the-air. Communication with LTE-M is typically TCP/IP, the language of the internet, and as such is equipped with the highest degree of security measures that are in current use. Transport Level Security (TLS) is the mechanism of secure data transactions and is the state-of-the-art for internet security.

The nRF9160 implements significant extra security measures to further enhance device security including Arm TrustZone and Arm CryptoCell for secure and trusted execution and key generation and storage.

In the same way that updates are critical to any connected computer's security, any connected device should be capable of downloading firmware updates over-the-air. This is to ensure that your device can be updated to fix security holes discovered after deployment either in standards or implementation. It also allows you to optimize your device’s performance over time and even deploy new features.

Latest News

nPM1100
Product
27 May 2021

nPM1100 PMIC is Nordic’s first power management product and combines a USB compatible Li-ion/Li-Po battery charger and highly efficient DC/DC buck regulator in a compact WLCSP pack...

Read More
a circuit board
Customer
02 Aug 2021

Panasonic Industry’s PAN1781 module employs Nordic nRF52820 ...

Read More
sitting table luggage suitcase water large standing room boat
Customer
29 Jul 2021

BrandBrandNew’s Heatle smart liquid heater employs Nordic’s ...

Read More
building sitting plane snow old covered blue parking kitchen ramp parked man air riding meter
Customer
26 Jul 2021

Trisense’s Fusion 310 CUI Sensor employs Nordic’s nRF9160 Si...

Read More
photo standing snow group man
Customer
26 Jul 2021

CoreAIoT’s CoreLocation System uses Nordic nRF52833 SoC to p...

Read More