nRF52840 DK

Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee development kit for the nRF52840 SoC

The nRF52840 DK is a versatile single board development kit for Bluetooth Low Energy, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary applications on the nRF52840 SoC. It also supports development on the nRF52811 SoC.

It facilitates development exploiting all features of the nRF52840 SoC. It includes an NFC antenna that quickly enables utilization of the NFC-A tag peripheral. All GPIOs are available via edge connectors and headers, and 4 buttons and 4 LEDs simplify input and output to and from the SoC. An on-board external memory is connected to the QSPI peripheral in the nRF52840 SoC.

It is Arduino Uno Revision 3 compatible, making it possible to mount 3rd-party shields with ease. It comes with an on-board SEGGER J-Link debugger allowing programming and debugging both the on-board SoC and external targets through the debug out header. It also interfaces directly with the Power Profiler Kit II.

The DK is typically powered with USB, but can be powered by a wide range of sources, within the supply range of 1.7 to 5.0 V. In addition to USB, it can be powered with external source, but also includes a CR2032 battery holder and a Li-Po battery connector, for in-field testing. Current consumption can be measured by using the dedicated current measurement pins.

Hardware layout and schematics for the nRF52840 DK are available under Downloads.

Download nRF52840 DK product brief [PDF]

Learn more from our experts

We have several webinars covering topics as Bluetooth, Thread and Zigbee Nordic Tech Webinars
available on-demand. Grab a coffee and enjoy!

nRF52 Series development kits

Overview

nRF52 DK

The nRF52 DK is a Bluetooth LE and Bluetooth mesh development kit for the nRF52805, nRF52810 and nRF52832 SoCs.

nRF52840 DK

The nRF52840 DK is a Bluetooth LE, Bluetooth mesh, Thread and Zigbee development kit for the nRF52811 and nRF52840 SoCs.

nRF52840 Dongle

The nRF52840 Dongle is complementary hardware to the nRF Connect for Desktop. It supports Bluetooth 5, Bluetooth mesh, Thread and Zigbee.

See all

Develop

with the nRF52811 and nRF52840 SoCs

nRF52811 SoC

Bluetooth 5.2 SoC supporting Bluetooth Low Energy, Bluetooth Direction Finding and Thread

64 MHz Cortex-M4
192 KB Flash, 24 KB RAM
2.4 GHz transceiver
2 Mbps, 1 Mbps, Long Range
Bluetooth Low Energy
Bluetooth Direction Finding
Thread
+4 dBm TX power
128-bit AES
UART, SPI, TWI, PDM
PWM
12-bit ADC

nRF52840 SoC

Bluetooth 5.2 SoC supporting Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee

64 MHz Arm Cortex-M4 with FPU
1 MB Flash, 256 KB RAM
2 Mbps, 1 Mbps, Long Range
Bluetooth Low Energy
Bluetooth mesh
Thread, Zigbee
+8 dBm TX Power
128-bit AES CCM, Arm CryptoCell-310
UART, SPI, TWI, PDM, I2S, QSPI, PWM
12-bit ADC
NFC
USB 2.0

Relevant SDKs

Click to read more

nRF5 SDK

The Bluetooth LE and ANT software development kit

The nRF5 SDK is a high quality, thoroughly tested software development kit to accelerate your software development efforts for the nRF52 and nRF51 Series SoCs. It contains hundreds of useful firmware modules and examples to assist in building your application.

nRF Connect SDK

nRF Connect SDK is a common software development kit for cellular IoT and short-range wireless, on the nRF9160 SiP, the nRF5340 SoC and all nRF52 Series SoCs.

nRF5 SDK for Mesh

The nRF5 SDK for mesh is ideal for developing applications that use Bluetooth mesh networks . It is a richly featured SDK for building sophisticated solutions with Bluetooth mesh.

See all

SoftDevices

Compatible with the nRF52840 DK

SoftDevice S112

SoftDevice S112 is a memory-optimized Peripheral-only Bluetooth LE protocol stack for the nRF52805, nRF52810, nRF52811, nRF52820 and nRF52832 SoCs.

Bluetooth 5.1 qualified
High-throughput 2 Mbps
CSA #2
LE Secure Connections
Privacy 1.2
Configurable ATT Table
Configurable ATT MTU
Custom UUID
Concurrent multiprotocol support

SoftDevice S140

SoftDevice S140 is a feature-rich Central and Peripheral Bluetooth LE protocol stack for the nRF52811, nRF52820, nRF52833 and nRF52840 SoCs.

Bluetooth 5.1 qualified
High-throughput 2 Mbps
Long Range
Advertising Extensions
CSA #2
LE Secure Connections
Privacy 1.2
Configurable ATT Table
Configurable ATT MTU
Custom UUID
LE Data Packet Length Extension
L2CAP connection-oriented channels
Concurrent multiprotocol support

SoftDevice S340

SoftDevice S340 is a combined Bluetooth LE and ANT protocol stack supporting concurrent operation on the nRF52840 SoC. It is distributed and Bluetooth qualified by Garmin Canada, Inc.

15 individual configurable ANT channels
Broadcast, acknowledged, burst transfer
Device search, pairing and proximity
Advanced burst transfer mode

Bluetooth 5 qualified
High-throughput 2 Mbps
Long Range
Advertising Extensions
CSA #2
LE Secure Connections
Privacy 1.2
Configurable ATT Table
Configurable ATT MTU
Custom UUID
LE Data Packet Length Extension
L2CAP connection-oriented channels
Concurrent multiprotocol support

Development tools

Test and verify

nRF Connect for Desktop

nRF Connect for Desktop is a cross-platform framework for development applications. It contains applications for testing Bluetooth Low Energy and LTE links, power optimization, programming and more.

nRF Connect for Mobile

nRF Connect for Mobile is a powerful generic mobile tool that allows you to scan and explore your Bluetooth Low Energy devices and communicate with them. Also supports DFU and Eddystone.