Home / 제품 / 2.4GHz RF / nRF24L01+

nRF24L01+

nRF24L01+

Ultra low power 2.4GHz RF Transceiver IC
Active
Overview

Description

The Nordic nRF24L01+ is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01+ provides a true ULP solution enabling months to years of battery life from coin cell or AA/AAA batteries. The Enhanced ShockBurst™ hardware protocol accelerator offloads time critical protocol functions from the application microcontroller enabling the implementation of advanced and robust wireless connectivity with low cost 3rd-party microcontrollers.

The Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller. No external loop filter, resonators, or VCO varactor diodes are required, only a low cost ±60ppm crystal, matching circuitry, and antenna.

The nRF24L01+ is available in a compact 20-pin 4 x 4mm QFN package.



Features

  • Low cost, single-chip 2.4GHz GFSK RF transceiver IC
  • Worldwide license-free 2.4GHz ISM band operation
  • 250kbps, 1Mbps and 2Mbps on-air data-rate options
  • Enhanced ShockBurst™ hardware protocol accelerator
  • Ultra low power consumption – months to years of battery lifetime
  • Drop-in compatible with the Nordic nRF24L01 previous generation Nordic RF transceiver IC
  • Fully on-air compatible with all Nordic nRF24L Series, as well as nRF24E and nRF240 Series

Applications

  • PC peripherals
  • Gaming
  • Sports and fitness
  • Toys
  • Consumer electronics

Related Products

Product Brief description
nRF24LU1+ 2.4GHz RF System-on-Chip with Flash and USB
nRF24LU1+ OTP 2.4GHz RF System-on-Chip with OTP and USB
nRF24LE1 2.4GHz RF System-on-Chip with Flash
nRF24LE1 OTP 2.4GHz RF System-on-Chip with OTP

Ordering codes

Tags

2.4GHz RF, Transceiver IC, nRF24L01+
Specification


The Nordic nRF24L01+ is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band.

Ultra low power consumption

  • 900nA deep sleep mode
  • 11.3mA Radio TX at 0dBm
  • 13.3mA Radio RX at 2Mbps on-air data-rate

 

2.4GHz Radio

  • 2.4GHz ISM band operation
  • GFSK modulation, 1 or 2MHz bandwidth
  • 0, -6, -12, and -18dBm programmable TX output power
  • Configurable on-air data rate of 250kbps, 1Mbps or 2Mbps
  • -94dBm RX sensitivity a 250kbps
  • -82dBm RX sensitivity at 2Mbps
  • -85dBm RX sensitivity at 1Mbps
  • Excellent co-existence performance
  • Compatible with a 16MHz ±60ppm crystal

 

Enhanced ShockBurst™ hardware protocol accelerator

  • Automatic packet assembly
    (Preamble, Address, CRC)
  • Automatic packed detection and validation
  • Dynamic payload length, 1 to 32Bytes
  • Auto retransmit
  • Auto Acknowledgment with optional payload
  • 6 data pipe MultiCeiver™
  • 3 separate 32Bytes TX and RX FIFOs

 

MCU Interface

  • SPI, up to 10Mbps

 

Power supply

  • Internal linear voltage regulator
  • 1.9 to 3.6V supply range

 

Temperature range of -40 to +80 ºC

Package options

  • 20-pin 4 x 4mm QFN
Development Tools and Software

The Nordic nRF24L01+ is supported by the following development tools and software:

Product Brief description
nRF24L01+ Evaluation Kit Evaluation Kit for the Nordic nRF24L01+
Reference Designs

 

No reference designs are currently available for the nRF24L01+.

Download

Product Specification

Code Name Version
nRF24L01P-PS nRF24L01+ Product Specification 1.0
PCN-059 Product Change Notification - Cu as additional bond wire option 1.0
PCN-075 Product Change Notification 1_0

Application Note

Code Name Version
nAN24-08 nRF Performance Test Instructions 1.1
nAN24-12 Software examples using ShockBurst modes in nRF24L01 and nRF24LU1 2.1
nAN400-08 QFN Soldering Reflow Guidelines 1.2

White Paper

Code Name Version
nWP-001 Benefits of Total Integration of Large RF Circuits
nWP-005 Introduction to wireless networks
nWP-006 nRF Performance Test Guidelines 1.0
nWP-008 Quarterwave printed monopole antenna for 2.4GHz
nWP-010 Regulatory and Compliance Standards for RF Devices
nWP-011 Sharing crystal with a microcontroller (MCU) 1.1
nWP-013 Tuning the nRF24xx matching network
nWP-015 Crystal Oscillator Design Considerations
nWP-017 Antenna tuning 1.0

Product Brief

Code Name Version
nRF24L01P-PB nRF24L01+ Product Brief 1.0

Software

Code Name Version
nRF51-SDK-zip nRF51 SDK Zip File

Development Kit

Code Name Version
nRF24L01P-EK nRF24L01+ Evaluation kit files

Qualification Reports

Code Name Version
nRF24L01P-HSR_ASE nRF24L01+ Hazardous Substance Report, ASE (Cu bond wire) 2013_07
nRF24L01P-HSR_ATP nRF24L01+ Hazardous Substance Report (Cu bond wire) 2014_02
nRF24L01P-MCR_ASE nRF24L01+ Material Composition Report, ASE 2011_01
nRF24L01P-MCR_ATP nRF24L01+ Material Composition Report, ATP 2013_04