nRF51422

nRF51422

ANT SoC
Active
Overview

Description

 

nRF51422 是功能强大、高灵活性的多协议 SoC,非常适用于 ANT+ 和 2.4GHz 超低功耗无线应用。 nRF51422 基于配备 256KB flash + 16KB RAM 的 32 位 ARM® Cortex™ M0 CPU 而构建。 嵌入式 2.4GHz 收发器支持 ANT 及专利 2.4GHz 操作,其中 nRF51422 与 Nordic Semiconductor 的 nRF24L 和 nRF24AP 系列产品无线兼容。

nRF51422 还具备丰富的模拟和数字周边产品,可以在无需 CPU 参与的情况下通过可编程周边产品互联 (PPI) 系统进行互动。 灵活的 31 引脚 GPIO 映射方案可使 I/O(例如串行接口、PWM 和正弦解调器)根据 PCB 需求指示映射到任何设备引脚。 这可实现完全的设计灵活性及引脚位置和功能。

nRF51422 支持 Dynastream Innovations 的嵌入式 S210 ANT 协议堆栈及 2.4GHz 协议堆栈(包括 Gazell),这两种协议堆栈在 nRF514 软件开发套件中均免费提供。nRF51422 需要单独供电,如果供电范围在 1.8-3.6V 之间,用户可选择使用芯片上的线性整流器,如果供电范围在 2.1-3.6V 之间,可以选择直流 1.8V 模式和芯片上的 DCDC 变压器。DC-DC 变压器的使用可在工作期间动态控制,并使 nRF51422 工作期间的射频峰值电流低于 10 mA @ 3V 供电 (TX @ 0 dBm & RX)。

nRF51422 具有 48 引脚 6x6 QFN 封装和 3.5x3.8mm 64 球形晶片水平芯片级封装 (WLCSP)。

 


Features

 

  • 单芯片, 高灵活性, 2.4GHz 多协议设备
  • 32 位 ARM Cortex M0 CPU 内核
  • 256KB flash 16KB RAM
  • 嵌入式 ANT 协议堆栈 (S210)
  • 线程安全和运行时保护
  • 3 种数据率 (2Mbs/1Mbs/250kBs)
  • 与 nRF24L 系列无线兼容
  • +4dBm 至 -20dBm 输出功率
  • 用于最大化能源效率应用和代码简化的 PPI 系统
  • 灵活的能源管理功能
  • 用于模拟和数字 I/O 的可配置 I/O 映射

 

Applications

 

  • 移动电话配件
  • 个人局域网
  • 运动和健身传感器及监视设备
  • 医疗传感器及监视设备
  • 物流及追踪应用
  • 家用/工业自动化
  • 环境传感器
  • 活动 RFID
  • 工业和商用传感器
  • 观众响应系统

 


Related Products

 

产品 简介
nRFS210 嵌入式 ANT 堆栈
nRF51822 蓝牙低功耗和 2.4GHz 专利 SoC
nRF24AP2-1CH 1 通道 ANT 连接 IC
nRF24AP2-8CH 8 通道 ANT 连接 IC
nRF24LE1 使用 Flash 的 2.4GHz RF 系统级芯片
nRF24LU1+ 使用 Flash 和 USB 的 2.4GHz RF 系统级芯片
nRF24L01+ 超低功耗 2.4GHz RF 收发器 IC

 

Ordering codes

SPECIFICATION

.

  • Ultra low power consumption
  • 6.3mA - TX at -4dBm (3V using on-chip DC-DC)
  • 8.0mA - TX at 0dBm (3V using on-chip DC-DC)
  • 11.8mA – TX at +4dBm (3V using on-chip DC-DC)
  • 9.7mA – RX (3V using on-chip DC-DC)
  • 13mA – RX at 1Mbps (No DC-DC)
  • 10.5mA – TX at 0dBm (No DC-DC)
  • 0.6µA – SYSTEM-OFF, no RAM retention
  • 1.2µA - SYSTEM-OFF, 8KB RAM retention
  • 2.6µA - SYSTEM-ON, All peripherals in idle mode

2.4GHz Multi-protocol Radio

  • +4dBm to -20dBm output power in 4dBm steps
  • -30dBm output power in whisper mode
  • -96dBm RX sensitivity at 250kbs
  • -90dBm RX sensitivity at 1Mbps
  • -85dBm RX sensitivity at 2Mbps
  • 2 Mbps, 1 Mbps and 250kbs supported data rates
  • Excellent co-existence performance

CPU

  • 32-bit ARM® Cortex™ M0 32-bit CPU

Memory

  • 256kB/128kB embedded flash
  • 32kB/16kB RAM

System Peripherals

  • 3 x 16/24-bit timers with counter mode
  • 16 channel CPU independent Programmable Peripheral Interconnect (PPI)
  • Encryption -128-bit AES ECB/CCM/AAR co-processor
  • RNG
  • RTC
  • Temperature sensor

GPIO

  • Flexible GPIO pin configuration
  • 31 GPIO
  • Up to 4 PWM

Digital I/O

  • Digital interfaces -SPI Master/Slave, 2-wire, UART
  • Quadrature decoder

Analog I/O

  • 8/9/10 bit ADC - 8 configurable channels
  • Low power comparator

Oscillators

  • 16MHz XO
  • 16MHz RCOSC
  • 32MHx XO
  • 32kHz XO
  • 32kHz RCOSC

Power Management

  • Wide supply voltage range (1.8 V to 3.6 V)
  • Flexible power management scheme
  • On-chip DC/DC converter
  • 600nA @ 3V OFF mode
  • 2.6µA @ 3V ON mode, all blocks in idle mode
  • 1.2µA @ 3V OFF mode + 1 region RAM retention
Development Tools and Software

 

Nordic offers a range of HW and SW tools you can leverage to get you started evaluating and developing applications on your chosen nRF51 Series device. Please use the links below to learn more about the development tools and software that are available from Nordic and 3rd parties.

 

Nordic Hardware

 

The nRF51 Series development hardware is provided by the nRF51 DK development kit and the nRF51 Dongle. The nRF51 DK and nRF51 Dongle covers the nRF51822 and nRF51422 SoCs and supports Bluetooth Smart, ANT and 2.4GHz proprietary SW development. In addition you may download the recommended nRF51 reference layouts from the download tab on this page.

 

nRF51 DK

The nRF51 DK is a versatile single-board development kit offering access to all nRF51 Series IO through an Arduino UNO compatible socket or standard pin headers. nRF51 DK supports programming and debugging through both Jlink (Segger OB) and Mbed.
nRF51 DK 3D

For more information and relevant downloads, check out the nRF51 DK product page.

 

nRF51 Dongle

The nRF51 Dongle is a small USB dongle that have the same program and debug capabilities as the nRF51 DK. It's prime purpose is to interact with PC based development tools and utilities from Nordic that enables it to be used as a peer device for your prototype, a sniffer to monitor on air traffic or indeed as an ultra small development board in itself.
nRF Dongle_both sides

For more information and relevant downloads, check out the nRF51 Dongle product page

 

Reference layouts

Since the nRF51 Series devices all are SoCs for wireless communication, the quality of the PCB layout is of outmost importance to ensure good radio performance. Official nRF51 reference layouts can be found on the download tab of this page, and please do follow them closely to avoid dissapointments when testing or qualifying your product.

top

 

3rd Party Hardware

 

A number of 3rd party companies have made both complementary components as well as HW solutions based on nRF51 Series devices. Utilising these products may simplify your nRF51 development as well as production.

 

3rd Party Board

Manufacturer Product Brief Description
WaveTek BLE WT51822-ABS BLE WT51822-ABS Bluetooth Smart shield for Arduino

Integrated Baluns

If you don't want to take on the job of making and tuning an antenna match with discrete passive components, please find nRF51 compatible integrated antenna baluns from the following vendors here:

 

3rd Party Matching Baluns

Manufacturer Product Brief Description
Cyntec TBL-1411-245-LR 2.45GHz Thin film Balun for nRF51x22-CxAx
Johnson Technology 2450BM08B0003 Impedance Matched Balun Filter for nRF51x22-CxAx
Johnson Technology 2450BM14E0003 Impedance Matched Balun Filter for nRF51x22-QFAx
Murata LFB182G45BG7D948 Impedance Matched Balun Filter for nRF51x22-CxAx (Consumer grade)
Murata LFB182G45BG7V948 Impedance Matched Balun Filter for nRF51x22-CxAx (Industrial grade)
STMicroelectronics BAL-NRF02D3 50 ohm integrated balun for nRF51x22-CxAx
STMicroelectronics BALF-NRF01E3 50 ohm integrated balun for nRF51x22-QFAA and nRF51x22-QFAC

 

3rd Party Modules

You may find a wide range of pre-qualified modules based on nRF51 Series devices on our 3rd Party Module page if you don't want to spend time on the Radio design work and NRE costs to qualify a design for Bluetooth Smart and teleregulatory authorities (FCC, ETESI, MIC, TELEC).

 

SOFTWARE

 

By using nRF51 Series devices you get free access to pre-qualified Bluetooth Smart as well as ANT protocol stacks for use in your applications along with extensive libraries and application examples.

The software are split in two major parts: SoftDevices containing wireless protocol stacks; and the nRF51 Software Development Kit (SDK) forming a common application code base for all nRF51 devices.

 

SoftDevices

A SoftDevice is precompiled and linked binary software, implementing a wireless protocol. While it is software, you as an application developer have minimal compile-time dependence on its features. The unique hardware and software support framework, in which it executes, provides run-time isolation and determinism in its behavior. These characteristics make the interface comparable to a hardware peripheral abstraction with a functional, programmatic interface.

The SoftDevice Application Program Interface (API) is available to applications as a high-level programming language interface, for example, a C header file.

Please find documentation as well as all available Softdevices, for free download, on the download tab of this page.

top

 

nRF51 SDK

The nRF51 Software Development Kit (SDK) is your starting point for software development on the nRF51 Series. It contains source code libraries and example applications covering :

  • Wireless as well as application examples
  • Bluetooth Smart and ANT+ profiles
  • Nordic’s 2.4GHz proprietary stack Gazell
  • Libraries for all nRF51 peripherals
  • Bootloaders
  • Wired as well as Over the Air (OTA) FW upgrades
  • Selected RTOS examples
  • Serialization libraries of Nordic SoftDevices

 

The nRF51 SDK is built on the ARM® CMSIS standard and supports the following SW development tool chains:

 

nRF51 SDK is available on the download tab of this page.

top

 

Tools

 

In order to aid your product development with programming and test/debug, Nordic also offers a range of tools enabling you to interact with and monitor prototype/product:

Tools Description
nRFgo Studio PC tool allowing device programming and Radio performance tests on nRF51.
Master Control Panel

An peer device emulator that allows you to connect to, monitor and interact directly with the bluetooth services in your product. This is a great tool to check if your product identifies itself and its capabilities the correct way as well as testing how it responds to correct as well as incorrect actions in the peer device.

MCP is an application for Windows PC’s (using the nRF51-Dongle).

nRF Master Control Panel

A powerful generic tool that allows you to scan and explore your Bluetooth Smart devices and communicate with them.

nRF MCP is an application on Android.

ANTware A peer device emulator for the ANT protocol running on PC’s with the nRF51-Dongle. This is a great tool to check if your product identifies itself and its capabilities the correct way as well as how it responds to correct as well as incorrect actions in the peer device.
nRF Sniffer

If the communication with a 3 party Bluetooth Smart Ready peer doesn’t work as intended, the nRF Sniffer enables you to monitor all the on air traffic between you and the peer through link establishment, security negotiations to exchange of data.

Often the only way to find where communication breaks down, and logs from this tool will often be the first thing our support engineers will ask for if you enter a support case/request on MyPage regarding communication problems.

nRF51-BLE-Driver Windows dll linking the MCP with the nRF51 Dongle. Presents an API similar to our SoftDevices for a PC application, making it ideal to make your own PC based test and demo tools.
nRFjprog (part of nRF51 toolset installer) Command line utility enabling programming of nRF51 devices through Jlink programmers/debuggers.
Mergehex (part of nRF51 toolset installer) Since the Nordic SoftDevices comes as precompiled hex files, when adding your own application, you will have (at least) 2 hex files to program into an nRF51 in your production line. Some industrial programmers can’t handle this and mergehex is a command line utility enabling you to combine multiple hex files into one for these programmers.
JlinkARM (part of nRF51 toolset installer) Driver for jlink debuggers

Please find these tools on the download tab of this page.

top

 

Mobile Apps

 

Your products are of course likely to communicate with a mobile device or computer, indeed that may be the sole purpose of it. To enable this you will need to interact with the wireless stacks and features in the installed OS’s themselves or an APP installed on top of these OS’s.

To facilitate this part of the development, Nordic has a range of application examples and tools for all the main mobile operating systems. Please visit our Mobile Apps page to get started with your mobile device SW development.

top

 

Legacy nRF51 development tools:

Not recommended for new designs.

Product Brief Description
nRF51822-mKIT ARM mbed Evaluation Kit using nRF51822 SoC (not recommended for new designs)
nRF51822 DK nRFgo Development Kit for nRF51822 (not recommended for new designs)
nRF51822 EK nRFgo Evaluation Kit for nRF51822 (not recommended for new designs)
Download

 

SoftDevices
Nordic Semiconductor protocol stacks are known as SoftDevices.SoftDevices are pre-compiled, pre-linked binary files. SoftDevices can be programmed in nRF5 series devices, and are freely downloadable from the Nordic website.

SoftDevices

Code Name Version
S110-SD-v6 S110 nRF51822 SoftDevice (Production ready) 6.2.1
S110-SD-v7 S110 nRF51822 SoftDevice (Production ready) 7.3.0
S110-SD-v8 S110 nRF51 SoftDevice (Production ready) 8.0.0
S120-SD-v1 S120 nRF51822 SoftDevice v1.0.1 (Production ready) 1.0.1
S120-SD-v2 S120 nRF51 SoftDevice (Production ready) 2.1.0
S130-SD
S130 nRF51 Series SoftDevice (production ready) 1.0.0
S130-SD-v2 S130 nRF51 SoftDevice (Production ready) 2.0.1
S210-SD-v4
S210 nRF51422 SoftDevice (Production-ready) 4.0.1
S210-SD-v5
S210 nRF51422 SoftDevice (Production-ready) 5.0.0
S310-SD-v1
S310 nRF51422 SoftDevice 1.0.0
S310-SD-v2
S310 nRF51422 SoftDevice (production ready) 2.0.1
S310-SD-v3
S310 nRF51422 SoftDevice (production ready) 3.0.0

 

Software Development Kit
Nordic Semiconductor's Software Development Kits (SDK) are your starting point for software development on the nRF51 and nRF52 Series. It contains source code libraries and example applications covering wireless functions, libraries for all peripherals, bootloaders, Wired and OTA FW upgrades, RTOS examples, serialization libraries and more.

Software Development Kit

Code Name Version
nRF5-SDK-v12-zip nRF5 SDK Zip File - works with S132 v3 and S130 v2 12.3.0

 

PC software
To aid your product development, Nordic also offers a range of tools enabling you to interact with and monitor your product

Software

Code Name Version
ANTware-SW ANTware II 4.100
nRF-Connect-OS-X nRF Connect tar.gz archive for OS X 1.1.1
nRF-Connect-Ubuntu-Linux nRF Connect tar.gz archive for Ubuntu Linux 64-bit 1.1.1
nRF-Connect-Windows nRF Connect installer for Windows 1.1.1
nRF-MCP-x64 Master Control Panel with Master Emulator API (64-bit) 3.10.0
nRF-MCP-x86 Master Control Panel with Master Emulator API (32-bit) 3.10.0
nRF-Sniffer nRF Sniffer (First Production release) - PC Software and Device Firmware that allow you to see all Bluetooth low energy packets on the air between two devices. 1.0.1
nRF5-BLE-Driver-Linux
nRF5 Bluetooth low energy GATT/GAP Driver for Windows. Used to set up and interact with BLE on nRF51 devices with connectivity firmware and SoftDevice. 0.5.0
nRF5-BLE-Driver-OSX
nRF5 Bluetooth low energy GATT/GAP Driver for Windows. Used to set up and interact with BLE on nRF51 devices with connectivity firmware and SoftDevice. 0.5.0
nRF5-BLE-Driver-Win
nRF5 Bluetooth low energy GATT/GAP Driver for Windows. Used to set up and interact with BLE on nRF51 devices with connectivity firmware and SoftDevice. 0.5.0
nRF51-IoT-SDK-zip nRF51 IoT SDK Zip File 0.8.0
nRF5x-Command-Line-Tools-Linux32 nRF5x toolset tar for Linux 32-bit (nrfjprog and mergehex) 9.5.0
nRF5x-Command-Line-Tools-Linux64 nRF5x toolset tar for Linux 64-bit (nrfjprog and mergehex) 9.5.0
nRF5x-Command-Line-Tools-OSX nRF5x toolset tar for OSX (nrfjprog and mergehex) 9.5.0
nRF5x-Command-Line-Tools-Win32 nRF5x toolset installer for Windows (JLinkARM, JLink CDC, nRFjprog, and mergehex) 9.5.0
nRF5x-MDK-GCC nRF5x MDK for GCC with 3-clause BSD license 8.14.1
nRF5x-MDK-GCC-5-Clause-NOD nRF5x MDK for GCC with 5-clause Nordic license 8.14.1
nRF5x-MDK-IAR nRF5x MDK for IAR Embedded Workbench with 3-clause BSD license 8.14.1
nRF5x-MDK-IAR-5-Clause-NOD nRF5x MDK for IAR Embedded Workbench with 5-clause Nordic license 8.14.1
nRF5x-MDK-Keil4 nRF5x MDK for Keil4 and Keil5 compatibility version with 3-clause BSD license 8.14.1
nRF5x-MDK-Keil4-5-Clause-NOD nRF5x MDK for Keil4 and Keil5 compatibility version with 5-clause Nordic license 8.14.1
nRF5x-MDK-Pack nRF5x MDK pack with 3-clause BSD license 8.14.1
nRF5x-MDK-Pack-5-Clause-NOD nRF5x MDK pack with 5-clause Nordic license 8.14.1
nRF5x-Pynrfjprog Python binding for nrfjprog.dll. Only usable in 32 bit Python 2.7, 3.4, and 3.5, in Windows, Linux and OSX. 9.5.0
raspbian-kernel-zip Raspbian kernel for Raspberry Pi 3.17.4

User Guides

Code Name Version
ANTmes-UG ANT Message Protocol and Usage 5.0
ANTware-UG ANTware II User's Guide 1.1
nRF-Sniffer-UG nRF Sniffer User Guide 1.4